![background image](http://html1.mh-extra.com/html/mircom/dtc-300a/dtc-300a_installation-and-operation-manual_1805705020.webp)
20
Keypad Configuration & Operation
9.5
Test Dialer (Command-Menu)
9.5.1 Dialer Test Messages
The following messages will display during the test processes of Lines #1 and #2. The
messages that will appear depend on the status of the dialer and the test results that are
found.
Press Enter to test Line #1. Press Cancel to exit
this menu. For a description of test messages,
see
Dialer Test Messages
.
Press Enter to test Line #2. Press Cancel to exit
this menu. For a description of test messages,
see
Dialer Test Messages
.
This feature flushes all reportable events from
the buffer, clears all dialer troubles and resets
the dialer operation. Press Enter to reset the
dialer. Press Cancel to exit this menu.
The dialer is checking the line for voltage. This
message automatically displays when Manual
Test is selected.
No DC line voltage. The line is dead or no
phone line is connected or the phone line
operates at abnormal voltage.
The dialer is waiting for a dial tone.
This message may indicate a noisy telephone
line.
The dial tone was detected and telephone
number dialing is in process.
This message indicates that the dialer failed to
send a DTMF tone.
- D i a l e r T e s t -
1 . L # 1 M a n u al t e s t
2 . L # 2 M a n u al t e s t
3 . R e s e t Di a l e r
1 . L # 1 M a n u a l t e s t
2 . L # 2 M a n u a l t e s t
3 R e s e t D i a l e r
.
D i a l e r i d l e n o w
N o D C V o l t
W a i t i n g f o r D i a l t o n e
F a i l e d : N o D i a l t o n e
D i a l i n g R e c e i v e r N o w
N o D T M F t o n e
Summary of Contents for DTC-300A
Page 2: ......