29
Keypad Configuration & Operation
9.11.5 Auto Test Time and Cellular Report Date
If the Cellular report date is set to 0, then the dialer alternates between Lines 1 and 2 when
performing the automatic test. If the Cellular report date is not set to 0, then the automatic test
is performed on Line 1 except on the Cellular report date, when it is performed on Line 2. See
examples in the following table.
9.11.6 Dialer Enable/Disable
9.11.7 Ring Detection
Cellular Report Date
Auto Test Time
Line 1 Tested
Line 2 Tested
0
00:30
12:30 a.m. every other day
(alternates with Line 2)
12:30 a.m. every other day
(alternates with Line 1)
0
6:00
6:00 a.m. and 6:00 p.m.
12:00 p.m. and 12:00 a.m.
0
12:00
12:00 p.m.
12:00 a.m.
15
00:30
12:30 a.m. every day
except on the 15th of the
month
12:30 a.m. on the 15th of
the month
15
6:00
6:00 a.m., 12:00 p.m., 6:00
p.m., and 12:00 a.m. every
day except on the 15th of
the month
6:00 a.m., 12:00 p.m., 6:00
p.m., and 12:00 a.m. on
the 15th of the month
15
12:00
12:00 p.m. and 12:00 a.m.
every day except on the
15th of the month
12:00 p.m. and 12:00 a.m.
on the 15th of the month
Command Menu/Dialer-Config/Enable/Disable
[X] ENABLE ->Default
[ ] DISABLE
The dialer is enabled by default.
When the dialer is enabled or
disabled, a warning message
appears.
Warning:
The
dialer cannot
report any event to the
monitoring station if it is
disabled.
Command Menu/Dialer-Config/Ring Detection
[ ] Disabled
[ ] 1
[ ] 2
[ ] 3
[ ] 4
[X] 5->Default
[ ] 6
[ ] 7
[ ] 8
Use this menu item to select the
number of rings on which the
panel’s modem will answer. The
default number of rings is five.
The maximum number of rings
you can define is eight.
If you select the “Disabled”
option, the modem will be
disabled and the panel will not
pick up the incoming call.
Enable/Disable
[X] ENABLE
- - - - - - W a r n i n g - - - - - - -
D i a l e r D i s a b l e d ! ! !
[ X ] 5
- R i n g D e t ec t N u m b e r -
Summary of Contents for DTC-300A
Page 2: ......