4
4-22
Setting up Network Servers
T
O
TO
THE
P
I
5500
•
On a UNIX system running SunOS 4 or other BSD-based variant, use the lpr command
to send a job to the Pi5500.
•
On a UNIX system running Solaris 2 or any System V implementation of UNIX, use the
lp command to send a job to the Pi5500.
•
Windows NT 4.0 users with the TCP/IP protocol loaded can send print jobs to a Pi5500
from their applications or from a command prompt.
Printing from applications uses the Windows NT PostScript driver. This gives
Windows NT 4.0 users the ability to set print options, which is not possible from the
command line.
Managing print jobs
UNIX network administrators can use UNIX utilities for viewing the list of jobs, and
for printing and removing jobs that are spooled on UNIX servers.
You can also use Fiery WebSpooler to manage jobs from remote workstations.
For more information, see the
Job Management Guide
.
Even without use of the Fiery utilities, you can:
• Set up the Pi5500 to print a log of printed jobs automatically after every 55 jobs
(see Job Log Setup on page 2-47).
• Print a Job Log manually at any time from the Functions menu on the Pi5500
Control Panel (see the
Job Management Guide
).
