2
2-12
Setting up the Pi5500
Enable Source Routing
Yes/No [Yes]
Select Yes if your network supports source routing.
Source Routing
Request All Route
Yes/No [Yes]
This option appears only if you enabled Source Routing. Select Yes if you want the
Request packet to travel to its destination by all routes.
Network Setup
Port Setup
Ethernet Setup
Enable Ethernet
Yes/No [Yes]
Select Yes if you have Ethernet cabling connected to the Pi5500.
Ethernet Speed
Auto Detect/100 Mbps/10 Mbps [Auto Detect]
Select Auto Detect if your network environment is mixed, or select the speed of the
network to which the Pi5500 is attached.
Network Setup
Port Setup
Token Ring Setup
Token Ring
Yes/No [No]
Select Yes if the Pi5500 is to be connected to a Token Ring network.
Token Ring Speed
4 Mbps/16 Mbps/Auto Detect [Auto Detect]
Select Auto Detect if your network environment is mixed, or select the speed
(4 Mbps or 16 Mbps) of the network to which the Pi5500 is attached.
Max. Frame Size (bytes)
4202/2154/1130/632 [4202]
Select the maximum frame size recommended by the network administrator at your
site. If you are uncertain of the setting to use, select the default value (4202).
