Minolta FIERY Pi5500, Configuration Manual, Page: 124 / 162

4
4-12 Setting up Network Servers
Configuring a Windows NT 4.0 server to support the Pi5500
To configure a Windows NT 4.0 server to communicate with the Pi5500, follow these
general steps. More detail is provided in subsequent sections.
• Load the TCP/IP network protocol on the server and configure it with an
IP address, subnet mask, and gateway.
• Enter the host name of the Pi5500 in the host database used by your system (see
page 4-13).
• On the Pi5500 Control Panel, perform Server Setup (see page 2-7), Network Setup
(page 2-9), PS Setup (page 2-42), and PCL Setup (page 2-44).
• On the Windows NT 4.0 server, create a printer for each Pi5500 print connection,
install the appropriate printer drivers (if necessary) and (optionally) share the printer
on the network (see page 4-14).
• Enter the host name and internal name of the Pi5500 in the printer connection.
For more information, see Getting Started .