FrameMaker Ver.5.5(PC) Di251/Di351 TROUBLESHOOTING
05.03.01
T-25
• Paper is not taken up at all.
• Paper is at a stop near the Vertical Transport Roller.
Step
Check
Result
Action
1
Paper meets product specifications.
NO
Change paper.
2
Paper is curled, wavy, or damp.
YES
Change paper.
Instruct user in correct
paper storage.
3
Feed Roll and Separator Roll are dirty,
deformed, or worn.
YES
Clean or change.
4
Paper take-up guide plate is dirty or deformed.
YES
Clean or change.
5
Separator Clutch operation check: the voltage
across CN7A-2 on LCC Control Board and
GND changes from DC24 V to DC0 V when the
Start key is pressed.
YES
Change Separator Clutch.
NO
Change LCC Control
Board.
Change Control Board.
Change Master Board.
Step
Check
Result
Action
1
Vertical Transport Roller/Roll is dirty, deformed,
or worn.
YES
Clean or change.
2
Registration Sensor operation check through
I/O check
NO
Change Registration Sen-
sor.
Change LCC Control
Board.
Change Control Board.
3
Registration Clutch operation check: the volt-
age across CN7A-4 on LCC Control Board and
GND changes from DC24 V to DC0 V when the
Start key is pressed.
YES
Change Registration
Clutch.
NO
Change LCC Control
Board.
Change Control Board.
Change Master Board.
Summary of Contents for Di251
