Minolta Di251, Service Manual

Page: 255 / 362

Touch Panel
Display
Setting (The default is ).
Intelligent Sorting Select whether to enable or disable the function that automatically
switches between Sort and Non-Sort according to the number of orig-
inals and the number of copy sets to be made.
Applicable when the system is equipped with a finishing option and
using an ADF or ADFR.
Output Tray Select the output tray for each application when the system is
equipped with a finishing option.
✽
When a Finisher is mounted: PC Print default setting "2"
“Small” Originals Select whether to enable or disable a copy cycle when it is initiated
with an original of a small size that is not detectable by the system
placed on the Original Glass.
✽
Default: Metric areas OFF / Inch Areas ON
Scanner Dry Set the time-of-day to run a Scanner drying cycle.
Note:
• When entering a value for Hours and Minutes and if it is a single-
digit number, first enter a “0.”
Density (ADF only) Adjust the copy image density level when the ADF is being used.
✽
: Initial setting
Highlighted
OFF
ON
<Fax>
2 3
1
ON OFF
When the standard original (text, etc.) is
used.
To give better reproduction of faint original.
✽
<PC Print>
2 3
1
<Copy> Displayed when a Job Tray is mounted.
1
2