MINOLTA-QMS PagePro 9100 User Manual Download Page 133

Page: 133 / 192

Optional Media Tray(s)

127

With another person’s help, place the
printer on top of the stack.

WARNING!

Your printer weighs approxima

tely 61.7 lbs (28 kg) fully assembled. Be

sure to have help when lifting and moving it.

ACHTUNG! Das Gewicht dieses Druckers beträgt ohne
Verbrauchsmaterial ca. 28 kg. Bitte versuchen Sie niemals,
den Drucker alleine anzuheben oder zu

transportieren.

Align the positioning pins on the media tray with the holes in the bottom of
the upper media tray and the printer to stack them correctly.

Using the mounting parts (four
screws and two brackets), secure
the printer to the media tray.

Using the enclosed screws,
attach the enclosed brackets to
the two locations on the back of
the printer.

Tighten the screws.

Summary of Contents for PagePro 9100

































































































































































































Search results

Summary of Contents for PagePro 9100

Reviews:

Related manuals for PagePro 9100

Brands by name

Popular brands

MINOLTA-QMS PagePro 9100, User Manual

Search results

Summary of Contents for PagePro 9100

Reviews:

Related manuals for PagePro 9100

Brands by name

Popular brands