MINOLTA-QMS PagePro 9100 User Manual Download Page 144

Page: 144 / 192

Deinstalling Accessories

138

Detach the mounting brackets from
the two locations on the back of the
printer.

Loosen and remove the screws in
front. (Use a coin to loosen the
screws.)

When deinstalling multiple optional
media trays, remove each using the
same procedure.

After loosening the screws, lift the
printer away from the optional media
tray(s).

WARNING!

Your printer weighs approximately 61.7 lbs (28 kg) without
consumables. Be sure to have help when lifting and moving it.

ACHTUNG! Das Gewicht dieses Druckers beträgt ohne
Verbrauchsmaterial ca. 28 kg. Bitte versuchen Sie niemals,
den Drucker alleine anzuheben oder zu transportieren.

Replace any tape and packing
material.

Summary of Contents for PagePro 9100

































































































































































































Search results

Summary of Contents for PagePro 9100

Reviews:

Related manuals for PagePro 9100

Brands by name

Popular brands

MINOLTA-QMS PagePro 9100, User Manual

Search results

Summary of Contents for PagePro 9100

Reviews:

Related manuals for PagePro 9100

Brands by name

Popular brands