MINOLTA-QMS PagePro 9100 User Manual Download Page 132

Page: 132 / 192

Optional Media Tray(s)

126

Optional Media Tray(s)

What’s in the optional media tray kit?

„

Optional media tray, up to three may be
installed (500 sheets each)

„

Four screws (for each tray)

„

Two brackets (for each tray)

Installing an Optional Media Tray

Turn off the printer, and unplug the
power supply cord and interface
cable.

Remove the optional media tray(s)
from the shipping carton, and place it
on a table or flat surface near the
printer.

Remove any tape and packing
material.

We strongly suggest that you
save the packaging materials
in case you ever need to
move or ship the printer.

If multiple 500-sheet media trays are to be installed, stack them on top of
each other at the desired setup location for the printer.

Each optional media tray increases your
printer’s media feed capacity by 500 sheets.
Up to three LFU units can be added. The
LFU is positioned under the printer, so no
extra horizontal space is necessary.

Summary of Contents for PagePro 9100

































































































































































































Search results

Summary of Contents for PagePro 9100

Reviews:

Related manuals for PagePro 9100

Brands by name

Popular brands

MINOLTA-QMS PagePro 9100, User Manual

Search results

Summary of Contents for PagePro 9100

Reviews:

Related manuals for PagePro 9100

Brands by name

Popular brands