MINOLTA-QMS PagePro 9100 User Manual Download Page 117

Page: 117 / 192

Duplexer

111

Duplexer

What’s in the duplexer?

„

Duplexer

„

Wrench

Installing a Duplexer

If both the optional duplexer and
the 4-bin mailbox are to be
installed, install the 4-bin mailbox first.

If the duplexer is already installed, remove it before installing the 4-bin
mailbox. See “Failure to follow instructions as outlined in this chapter
could result in voiding your warranty.” on page 134.

Turn off the printer, and unplug the
power supply cord and interface
cable.

Remove the cover from the back of
the printer.

Since the back cover is secured with
a screw, use the wrench supplied with
the duplexer to loosen it.

Keep the removed cover in a
safe place for future use.

Duplex (2-sided) printing can be done
automatically with a duplexer and enough
memory installed. See “Duplexing” on page 45.

Summary of Contents for PagePro 9100

































































































































































































Search results

Summary of Contents for PagePro 9100

Reviews:

Related manuals for PagePro 9100

Brands by name

Popular brands

MINOLTA-QMS PagePro 9100, User Manual

Search results

Summary of Contents for PagePro 9100

Reviews:

Related manuals for PagePro 9100

Brands by name

Popular brands