MINOLTA-QMS PagePro 9100, User Manual

Page: 134 / 192

Time-of-Day Clock 128
8
Remove the media tray from the
upper unit (printer or other 500-sheet
media tray), and then secure the two
units at the two locations shown
using the enclosed screws. (Use a
coin to tighten the screws.) After
tightening the screws, replace the
media tray.
When installing multiple 500-sheet
media trays, secure each using the
same procedure.
9
Reconnect all interface cables.
10
Reconnect the power cord, and turn
on the printer.
5 "
In compliance with UL guide-
lines, “The appliance inlet is
considered to be the main
disconnect device.”
Media Trays
The printer comes with a 200-sheet multipurpose tray (inputbin 1) and a
500-sheet upper media tray (inputbin 2). You may install up to three
500-sheet optional media trays (inputbins 5 through 7). Additional trays may
be purchased. The replacement trays provide these benefits:
„
Expanded flexibility to switch media size, color, and type without having to
unload and load media.
„
Increased media-feed capacity.
Keep replacement trays close by, so you can easily change media by slipping
one tray out and another in.
Time-of-Day Clock
The time-of-day clock provides time and date information on the startup page
and in the accounting data.