MIMAKI DS-1600, Operation Manual

Page: 59 / 172

- 1.41 -
21. Move down the clamp lever on the front face of
the plotter.
Secure the roll fabric pulled out to the front face, using the pinch
roller.
22. Detect the fabric width.
• The fabric can be feed by pressing the JOG
key [ ] and [ ].
In case of Roll fabric:
a. Press the JOG key [ ] on the operation panel.
b. Specify the remaining length of the fabric.
c. Press the [ENTER] key.
The fabric width is detected automatically and then the mode
enters the LOCAL mode.
In case of Leaf fabric:
a. Press the JOG key [ ] on the operation panel.
The status of the feeding unit and the take-up unit is dis-
played.
The fabric width is detected automatically and then the mode
enters the LOCAL mode.
M E D I A S E L EC T
R O L L < > L E A F
M E D I A S E T
C A P A C I T Y = 1 1 0 m
D e t e c t i n g M ED I A
P L E A S E W A I T
< < L O C A L > >
w i d t h : 1 2 7 2m m
M E D I A S E L EC T
R O L L < > L E A F
F E E D I N G D I V . O F F
T A K E - U P D I V . O F F
D e t e c t i n g M ED I A
P L E A S E W A I T
< < L O C A L > >
w i d t h : 1 2 7 2m m