MIMAKI DS-1600, Operation Manual

Page: 123 / 172

- 4.13 -
When the message [Clean Wiper Shaft] is displayed
The message shown on the right is displayed after
several numbers of wiping.
Please clean the wiper shaft at once if this message is
displayed.
Extremely dirty wiper shaft may cause wiper malfunction and resulting an error display.
The wiper is functioning only during the head cleaning, and the number of wiping vary
according to the cleaning type.
• When exchanging the wiper, please clean the wiper shaft too.
STEPS:
1. Select [STATION] from [MAINTENANCE].
(See page 4.3)
2. Press the [ENTER] key.
3. Press the [ENTER] key.
The carrige will come out of the capping station.
4. Open the maintenance cover.
5. Clean the wiper guide shaft using a swab or cloth.
(If dirt is hard to remove, use a swab of cloth damepened with
cleaning liquid.)
6. Close the maintenance cover, then press the
[ENTER] key.
The menu enters the LOCAL mode.
W i p e r
C l e a n W i p e r S h a f t
M A I N T E N A N C E
S T A T I O N < e n t >
S T A T I O N M A I N T
M A I N T : CA R R I AGE ou t
C AR R I A GE o u t
C OM P L E T E D
: en t
< < L O C A L > >
w i d t h : 1 2 7 2m m
I N T I A L I Z I N G
P L E A S E WA I T