MIMAKI DS-1600, Operation Manual

Page: 100 / 172

- 3.18 -
Setting a unit of length displayed on the LCD [MM/INCH]
This function sets a unit of set values displayed on the LCD.
Use this function when displaying “width” and “length” of the fabric after setting of the origin or
detection of the fabric. When the plotter is shipped from the factory, the unit of display is set to
MM (millimeter).
MM : Numerics are expressed in millimeters.
INCH : Numerics are expressed in inches.
STEPS:
1. Select a type. (See page 3.3)
Here, select [Type.1].
2. Press the [ENTER] key.
3. Press the JOG keys [ ] and [ ] to select
[MM/INCH].
4. Press the [ENTER] key.
5. Press the JOG keys [ ] and [ ] to set a unit of
length displayed on the LCD.
Here, select [MM].
6. Press the [ENTER] key.
7. Press the [END] key twice.
The menu returns to the LOCAL mode.
S E T U P
S E L E C T
: T Y P E . 1
T Y P E 1
M E D I A CO M P . < e n t >
T Y P E 1
M M / I N C H < e n t >
< < L O C A L > >
w i d t h : 1 2 7 2 m m
T Y P E 1
M M / I N C H < e n t >
T Y P E 1
M M / I N C H : MM
T Y P E 1
M M / I N C H : MM