MIMAKI DM3-1810S, Operation Manual

Page: 89 / 146

- 5.3 -
Maintenance of the machine
Maintenance setup functions
The following describes the overview of and settings for each function.
Name function
List Plotting the set condition of the machine.
Data Dump
Plotting data commands received from the computer, in HEX code.
Print Adjust Adjust the dot position according to the head height, high/low.
Station Clean the inside of the station and replace the wiper.
(Wiper Exchng, Carriage Out, Nozzle Clean)
Ink Filling
Fill up the ink.
Perform it when nozzle clogging is still not solved.
In addition, when Nozzle cleaning or Storage Wash is performed, this may cause
color mixture.
Perform it when ejecting mixed color ink.
Ink Change This is not normally used.
Information
Display the firmware versions of this machines and an interface.
Routine Ctrl To set Routine Flushing or Routine Cleaning on/off and interval.
Wiper Level Select the level of changing the wiper.
Head To Use When making plotting, using only headline which set this function.
page 5.4
page 5.5
page 5.6
page 5.8
page 5.11
–
page 5.13
page 5.15
page 5.12
page 5.14