MIMAKI DM3-1810S, Operation Manual

Page: 14 / 146

- x -
Never do the following
WARNING
Do not disassemble or modify the machine.
• Never disassemble or remodel
the main unit of the machine and
the ink cartridge. Disassembling/
remodeling any of them will
result in electric shocks or
breakdown of the machine.
Do not use the machine in damp places.
• Avoid damp environments when
putting the machine into service.
Do not splash water onto the
machine.
High-humidity or water will give
rise to fire, electric shocks or
breakdown of the device.
Abnormal event occurs.
• If the machine is used under an
abnormal condition where the
machine produces smoke or
unpleasant smell, fire or electric
shocks can result. Be sure to
turn off the power switch immedi-
ately and detach the plug from
the receptacle. Check first to be
sure that the machine no longer
produces smoke, and contact a
distributor in your district for
repair. Never repair your ma-
chine by yourself since it is very
dangerous for you to do so.
Handling of ink cartridges
• The ink is noxious.
If ink settles on the skin or
clothes, immediately wash it off
with detergent or water.
If you get ink in your eyes,
immediately wash your eyes with
a lot of clean water for at least
15 minutes. In this case, also
wash the backside of eyelids to
rinse ink away completely. Then,
consult a doctor as soon as
possible.
• Store ink cartridges and waste
ink tank in a place that is out of
the reach of children.
• If ink settles on the skin or
clothes, immediately wash it off
with detergent or water.
If you get ink in your eyes,
immediately rinse off with water
and consult a medical doctor.
Handling of the power cable
• Take care not to damage, break
or work on the power cable.
If a heavy matter is placed on
the power cable, heated or
drawn, the power cable can
break to cause fire or electric
shocks.
Power supply and voltage
• Be sure to use the machine with
the power supply specifications
indicated.
• Be sure to connect the plug of
the power cable to a grounded
receptacle. If not, fire or electric
shocks can result.
Laser sensor
• This device is equivalent to Class
I laser device according to CDRH
Regulation. LASER CAUTION
Label for CDRH regulation shown
below is provided with the device.
Also, the device is equivalent to a
Class I laser device according to
JIS/IEC standard. The label ac-
cording to these standards shown
below is provided with the device.
To avoid causing pain in your eyes
or visual impairment, do not re-
view the laser beam through a
lens or the other optical observa-
tion system.