MIMAKI DM3-1810S, Operation Manual

Page: 59 / 146

- 3.3 -
Cleaning the ink at the bottom of the slider
The ink may gel and collect under the slider after a long use. The ink droplets may grow in
size and smear the work as a result. To prevent this problem, wet the supplied cotton swab in the
cleaning liquid for maintenance and use it to remove the ink from under the head in regular intervals.
• Do not use the cotton swab on the head nozzles. The cotton swab may
damage the nozzles and cause poor ink delivery.
Cleaning Tools :
• Cleaning liquid for maintenance
• Cotton swabs
• Pipette
• Goggle, Gloves
Routine maintenance
Cleaning fluid for maintenance
Use a cleaning fluid for maintenance corresponding to the ink used.
ES3 ink : Cleaning fluid for maintenance MS2/ES3/MS kit (SPC-0369)
SS1 ink : Cleaning fluid for maintenance RS(SPC-0336)
Maintenance for frame components
If the frame components of the plotter have become dirty, wipe off the dirt of the frame with soft
cloth sopped in water or neutral detergent with water and squeezed. Wipe off dust on the table.
Cleaning Tools :
• Neutral detergent
• Soft cloth (quantity)