MIMAKI DM3-1810S, Operation Manual

Page: 56 / 146

- 2.22 -
Turning the power off
• Normally do not turn off the power
To ensure stability of ink flushing, the device should be flushed regularly the
small amounts of ink. Leave the power turned on and do not remove a plug
even when the device is not in use for a prolonged period of time. The small
amounts of ink should be flushed regularly regardless of the device condi-
tion. (REMOTE mode, LOCAL mode)
• Maintenance with the power turned off
Do not leave the power turned off for more than one hour. If the power is
turned off for more than 5 days, the ink flushing does not work. (There is no
problem caused if the power of the blower is turned off.) To prevent from
pressing the switch, the parts of power switch is covered on. Remove the
cover when the power is tuned off.
• Make sure that the head in the capping station
If the power is turned off while the machine is engaged in plotting, the head
may fail to be retracted in the capping station. If the head is left without
capped for an extended period of time, the nozzle will be clogged with dust.
If the power to the machine is turned off without the head capped, return on
the power to the machine.
1. Turn off the power to the computer which is
connected to the machine.
2. Turn on the power to the machine.
Press the power switch to [ O ].
Turning off the blower for the absorption table
1. Press the VACUUM switch once.
(The switch light turns off.)
The blower turns off.