26
27
MXF
CVBP
4838 88 01 XXXXXX MJJJJ
72
V
2402-2480 MHz
1,8
dBm
4.0 BT signal mode
11 200 min
-1
13,6 ... 15,7 kg
2,13 m / 4,26 m
38,1 mm / 50,8 mm (1,5“ / 2,5“)
> 9 m
IP
20
-18...+50
°C
MXF CP203, MXF XC406
MXFC
89 dB(A) / 3 dB(A)
100 dB(A) / 3 dB(A)
7,85
m/s
2
/ 1,5 m/s
2
ENGLISH
ENGLISH
TECHNICAL DATA
Type
Production code
Battery voltage
Frequency band(s) of Bluetooth
Radio-frequency power
Bluetooth version
Vibrations per minute
Weight according EPTA-Procedure 01/2014 (MXF CP203, MXF XC406)
Flexible shaft
Vibration head diameter
Remote control communication range
Protection class
Recommended ambient operating temperature
Recommended battery types
Recommended charger
Noise Information:
Measured values determined according to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Wear ear protectors.
Vibration Information:
Total vibration values (vector sum in the
three axes) determined according to EN 60745.
Vibration emission value a
h
/ Uncertainty K
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock,
fi
re and/or serious injury.
Save all warnings and instructions for future reference.
CONCRETE VIBRATOR SAFETY WARNINGS
Flexible shafts
Avoid sharp bends of the
fl
exible shaft during operation, transport
and also storage.
Do not use
fl
exible shaft to pull the motor.
Do not step on or drive over the
fl
exible shaft.
Vibrating head
Do not put down the vibrating head until the machine has come to a
complete standstill.
Only run the vibrator head in fresh concrete and not in the air, it can
heat up and be damaged.
Do not touch the vibrating head with your hands or other body parts
while it is in operation.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is
recommended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Wear a suitable dust protection mask.
Contact with concrete, cement or other aggregates can cause skin
irritation. Avoid direct contact with the skin.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or by
burning them. Milwaukee Distributors o
ff
er to retrieve old batteries to
protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System MXF chargers for charging System MXF battery
packs. Do not use battery packs from other systems.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it o
ff
immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
WARNING
This device contains a lithium button/coin cell
battery. A new or used battery can cause severe internal
burns and lead to death in as little as 2 hours if swal lowed or
enters the body. Always secure the battery cover. If it does not close
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in EN
60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for di
ff
erent applications, with
di
ff
erent accessories or poorly maintained, the vibration emission may di
ff
er. This may signi
fi
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o
ff
or when it is running
but not actually doing the job. This may signi
fi
cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e
ff
ects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
securely, stop using the device, remove the batteries, and keep it
away from children. If you think batteries may have been swallowed
or entered the body, seek immediate medical attention.
Warning!
To reduce the risk of
fi
re, personal injury, and product
damage due to a short circuit, never immerse your tool, battery pack
or charger in
fl
uid or allow a
fl
uid to
fl
ow inside them. Corrosive or
conductive
fl
uids, such as seawater, certain industrial chemicals,
and bleach or bleach containing products, etc., can cause a short
circuit.
SPECIFIED CONDITIONS OF USE
The concrate vibrator is designed for compacting fresh concrete.
The vibrating head must be immersed in the fresh concrete.
The machine may only be operated if all the instructions in this
operating manual and the service and maintenance instructions are
observed.
No non-permitted components may be connected to the drive.
The machine must not be operated without a
fl
exible shaft and
vibrating body.
Do not use this product in any other way as stated for normal use.
RESIDUAL RISK
Even when the product is used as prescribed, it is still impossible
to completely eliminate certain residual risk factors. The following
hazards may arise in use and the operator should pay special
attention to avoid the following:
• Injury caused by vibration.
Hold the product by designated handles and restrict working time
and exposure.
• Exposure to noise can cause hearing injury.
Wear ear protection and limit exposure.
• Injury due to
fl
ying debris
Wear eye protection, heavy long trousers, gloves and substancial
footwear at all times.
• Inhalation of toxic dusts.
ONE-KEY™
To learn more about the ONE-KEY functionality for this tool, please
reference the Quick Start guide included with this product or go to
www.milwaukeetool.com/one-key. To download the ONE-KEY app,
visit the App Store or Google Play from your smart device.
Also, when the product experiences ESD, the Bluetooth
communication will be disconnected. It needs to be reset manually
to recover.
We considered the results to be within our minimum acceptable
performance level according to EN 55014-2 / EN 301489-1 / EN
301489-17.
ONE-KEY™ Indicator
Solid Blue
Wireless mode is active and ready to be
con
fi
gured via the ONE-KEY™ app.
Blinking Blue
Tool is actively communicating with the ONE-
KEY™ app.
Blinking Red
Tool is in security lockout and can be unlocked
by the owner via the ONE-KEY™ app.
NOTES FOR LI-ION BATTERIES
Use of Li-Ion batteries
Battery packs which have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of
the battery pack. Avoid extended exposure to heat or sunshine (risk
of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged,
after used.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and
away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
Battery protection for Li-Ion Akkus
In extremely high torque, binding, stalling and short circuit situations
that cause high current draw, the tool will vibrate for about 5
seconds, the fuel gauge will
fl
ash,and then the tool will turn OFF. To
reset, release the trigger.
Under extreme circumstances, the internal temperature of the
battery pack could raise too much. If this happens, the fuel gauge
will
fl
ash until the battery pack cooled down. After the lights go o
ff
,
the work may continue.
Transport of Lithium Batteries
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
• The user can transport the batteries by road without further
requirements.
• Commercial transport of Lithium-Ion batteries by third parties is
subject to Dangerous Goods regulations. Transport preparation
and transport are exclusively to be carried out by appropriately
trained persons and the process has to be accompanied by
corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and insulated
to prevent short circuit.
• Ensure that battery pack is secured against movement within
packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice.
FUNCTIONAL DESCRIPTION
1 Backpack
2 Carry handle
3 Backpack latch
4 Coupler locking handle
5 Flex shaft coupler
6 ONE-KEY battery compartment
7 Battery
8 Remote control storage
9 Switch position remote control
10 Switch position machine o
ff
11 Switch position machine on
12 Pairing button/LED
13 LED activated machine
14 Button for activating the machine
15 Cold start LED
16 ONE-KEY indicator
17 Vibrating head 1.5"
18 Vibrating haed 2.5"
19 Flexible shaft
20 Connector to machine
21 Connector to vubrating head
22 Remote control
23 Transmit LED
24 Pairing button
25 Remote control on/o
ff
switch
26 Start/stop button
Concrete
vibrator
