Miele WCI 320, Operating Instructions Manual

Page: 42 / 92

Extra options
42
Extra options can be selected
using the “Extras” sensor
control
Selecting extra options in the display
 Touch the Extras sensor.
The first extra option which can be
selected appears in the display.
 Touch the  sensors until the extra
option you want appears in the
display.
 Confirm the extra option with OK .
The extra option will be given a

next
to it.
Deselecting an extra option
 Touch the Extras sensor.
The first extra option which can be
selected appears in the display.
 Touch the  sensors until No Extras
appears in the display.
 Confirm
No Extras
with the OK sensor.
The previously selected extra option is
now deselected.
Stains
For cleaning stained laundry. The
programme sequence is altered with
this option.
Pre-wash
For laundry with large amounts of dirt,
e.g. dust and sand.
Soak
For heavily soiled and stained items
with protein stains.
A duration of between 30 minutes and 6
hours can be chosen for the soak
process in 30 minute increments. See
“Settings” for more information.
The factory default setting is
30 minutes.
Intensive
For hard-wearing laundry that is very
heavily soiled. Cleaning efficiency is
increased through more intense
mechanical action and the application
of more heat energy.
Extra quiet
This option reduces noise levels during
the wash programme. Use this if you
want to wash during quiet periods (for
instance when children are sleeping).
The final spin is automatically reduced
to

(Rinse hold). The programme
duration is increased.
Extra gentle
Drum rotation and wash duration are
reduced. Lightly soiled fabrics are
washed more gently.
AllergoWash
This option should be used where high
standards of hygiene are required. More
energy is used to lengthen temperature
holding times and more water is used to
increase rinsing efficiency. The items
must be suitable for drying in a tumble
dryer
 
and suitable for ironing


.