manualshive.com logo in svg

Miele WCI 320, Operating Instructions Manual

Share
Download
Miele WCI 320 Operating Instructions Manual Download Page 26

4. Select programme settings

26

Selecting a temperature/spin
speed

You can alter the preset temperature/
spin speed of a wash programme if
this option is permitted for that
programme.

The temperatures reached inside the
washing machine might not be the
same as the temperatures selected.
Perfect wash results are achieved
through a combination of energy use
and wash duration.

2:59

OK

 1600

Touch the 



 sensors above or

below the temperature or spin speed
value in the display until the
temperature/spin speed you want
appears in the display.

Selecting an extra option

Touch the sensor for the extra you
want. It then lights up brightly.

Tip: 

You can select multiple Extras for a

wash programme.

Not all extra options can be selected
with every programme. If an extra
option is not dimly lit, this option is not
permitted for the wash programme
(see “Extra options”).

Extras sensor control

You can select additional extras using
the Extras sensor.

Touch the 

Extras

 sensor.

The following appears in the display:

No Extras

OK

Touch the 



 sensors until the extra

option you want appears in the
display.

Confirm the extra option with 

OK

.

Summary of Contents for WCI 320





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands