Spinning
34
Interim spin
There is a spin cycle after the main
wash and between the rinses. A
reduction in the final spin speed will
also reduce the interim spin speed as
appropriate.
Omitting the final spin (Rinse
hold)
If Rinse hold is selected, the laundry
remains in the water following the final
rinse cycle. This helps prevent creasing
if the laundry is not going to be
removed from the drum immediately
after the end of the programme.
Set the spin speed
.
To start the final spin
The washing machine will display the
maximum spin speed possible. You can
reduce the spin speed.
Touch the
Start/Stop
sensor.
To end the wash programme
Select this option if you want to remove
the laundry when it is dripping wet and
without spinning.
Reduce the spin speed to
0
.
Touch the
Start/Stop
sensor.
The water will be pumped away.
Omitting the interim spin and
the final spin
Before the start of the wash
programme, reduce the spin speed to
0
.
Touch the
Start/Stop
sensor.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch on.
In some programmes an additional rinse
is introduced with this setting.
Summary of Contents for WCI 320
Page 90: ......
