Miele WCI 320 Operating Instructions Manual Download

Page: 48 / 92

Changing the programme sequence

Safety lock

Locking the machine prevents a wash
programme being cancelled by
mistake.

Activating the safety lock



Touch the

Start/Stop

sensor.

The following will appear in the display:

Cancel programme











Use the



sensor control to scroll

through the list:

Activate safety lock











Touch the

sensor.

Deactivating the safety lock



Touch the

Start/Stop

sensor.

The following will appear in the display:

Deactivate lock











Touch the

sensor.

Adding or removing laundry

Laundry can only be added or
removed at the beginning of a wash
programme.

If the message to Add laundry is not
visible in the display then it is no
longer possible to add items of
laundry.



Press the

Start/Stop

button.

The following will appear in the display:

Cancel programme











Touch the



sensors until the

following appears in the display:

Add laundry











Touch the

sensor.

The programme will stop and the door
will unlock.



Pull open the door.



Add or remove items.



Close the door.



Touch the

Start/Stop

sensor.

The programme will continue.

Summary of Contents for WCI 320





























































































Search results

Summary of Contents for WCI 320

Reviews:

Related manuals for WCI 320

Brands by name

Popular brands

Miele WCI 320, Operating Instructions Manual

Search results

Summary of Contents for WCI 320

Reviews:

Related manuals for WCI 320

Brands by name

Popular brands