Miele WCI 320 Page 17 Operating Instructions Manual Download

Page: 17 / 92

Before using for the first time



Damage resulting from incorrect

installation and connection.
Installing and connecting the
washing machine incorrectly will
cause serious property damage.
See “Installation”.

Protective foil and stickers
removal



Remove:

– The protective foil from the door

– Any stickers from the front and the lid

Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.

This washing machine has undergone
a complete functional test at the
factory and there will be some residual
water in the drum from this process.

Remove the drain hose elbow
from the drum

An elbow piece for the drain hose is
stored in the drum.



Reach under the door grip and pull
the door open.



Remove the elbow piece.



Shut the door with a gentle swing.

Summary of Contents for WCI 320





























































































Search results

Summary of Contents for WCI 320

Reviews:

Related manuals for WCI 320

Brands by name

Popular brands

Miele WCI 320, Operating Instructions Manual

Search results

Summary of Contents for WCI 320

Reviews:

Related manuals for WCI 320

Brands by name

Popular brands