manualshive.com logo in svg

Miele WCI 320, Operating Instructions Manual

Share
Download
Miele WCI 320 Operating Instructions Manual Download Page 14

Operating the washing machine

14

Control panel

a

Control field

The control field consists of a
display and various sensor controls.
The individual sensors are explained
in the following sections.

b

Display

The following values are shown on
the display and/or selected from it:
1. The temperature, spin speed, and

time left for the selected wash
programme.

2. The individual values for selected

extras and settings.

c



 

sensors

Values shown in the display can be
changed with the 



 sensors. The

 sensor increases the value or

moves up the list; the 

 sensor

decreases the value or moves down
the list.

d

OK sensor

The 

OK

 sensor is used for

confirming selected values.

e

PowerWash display with the Quick
and Eco sensor controls

If the PowerWash indicator lights up
when you select a programme you
can chose between 3 programme
sequences. For further information
go to “4. Select programme
settings”, section “PowerWash
display with the Quick and Eco
sensor controls”.

– PowerWash indicator: Normal

programme sequence

– PowerWash indicator with Quick

sensor control: Short programme
sequence

– PowerWash indicator with Eco

sensor control: Energy saving
programme sequence

Summary of Contents for WCI 320





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands