Problem solving guide
59
Fault message at the end of a programme
Problem
Cause and remedy
Check dosage
Excessive foam has built up during washing.
Use less detergent next time and follow the
manufacturer's instructions on dosage given on
the packaging.
Hygiene info: run a
programme at min.
75 °C or the "Clean
machine"
programme
A wash programme using a temperature above 60 °C
has not been run for a long time.
Turn the programme selector to
Further
programmes
/
.
Touch the
sensors until
Maintenance
appears
in the display.
Touch the
OK
sensor to confirm.
The following appears in the display:
Clean machine
Touch the
OK
sensor to confirm.
Run the
Clean machine
programme using Miele
machine cleaner or a universal powder detergent.
This will clean the washing machine and prevent a
build-up of bacteria and odours.
Align the washing
machine
The
Pre-ironing
extra option which runs at the end of
the programme could not be carried out properly.
Check whether the washing machine is aligned
correctly as described in “Installation – Levelling
the machine”.
Check whether the maximum delivery head of 1 m
has been exceeded.
If the fault message appears again, contact Miele.
The washing machine can still be used, however
without the
Pre-ironing
extra option.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the
OK
sensor.
Summary of Contents for WCI 320
Page 90: ......
