Miele G 879 SCVI Operating And Installation Instructions Download Page 41

Page: 41 / 76

Cleaning the wash cabinet

In general the wash cabinet is self-
cleaning, provided that the correct
amount of dishwasher detergent is
used.

If however there are lime scale or
grease deposits these can be removed
with a proprietary dishwasher cleaner.

Cleaning the door and the
door seal

Wipe the door seal regularly with a
damp cloth and remove any par-
ticles of food.

Wipe away any residue of food and
drink spillage from the sides of the
dishwasher door. These are not part
of the wash cabinet and are not
reached by water from the spray
arms.

Cleaning the control panel.

The control panel can be cleaned
using a damp cloth and mild deter-
gent.

Do not use abrasive, all purpose or
glass cleaners or ammonia, as their
use may damage plastic surfaces.

Cleaning the door panel.

Plastic laminate panels should be
cleaned using a suitable, non-ab-
rasive cleaning agent, or mild soapy
water.

Panels made from wood should be
cleaned using a soft damp cloth and
an appropriate wood cleaner.

Cleaning and care

Summary of Contents for G 879 SCVI













































































Search results

Summary of Contents for G 879 SCVI

Reviews:

Related manuals for G 879 SCVI

Brands by name

Popular brands

Miele G 879 SCVI, Operating And Installation Instructions

Search results

Summary of Contents for G 879 SCVI

Reviews:

Related manuals for G 879 SCVI

Brands by name

Popular brands