Cleaning the spray arms
On rare occasions particles of food
may get stuck in the spray arm jets.
They can be easily cleaned as follows.
Push up the middle spray arm
b
to
engage the tooth-wheel mechanism.
Then unscrew the spray arm
c
.
Remove the lower basket and take
out the lower spray arm (lift up as il-
lustrated).
Dishwashers with cutlery basket:
Unscrew the upper spray arm.
Dishwashers with cutlery tray:
Pull out the cutlery tray.
Lift up the upper spray arm to en-
gage the tooth-wheel mechanism
and then unscrew the spray arm.
Using a sharp, pointed object, push
the food particles into the jets and
rinse well under running water.
Please note:
After replacing the spray arms, check
that they move freely.
Cleaning and care
38
Summary of Contents for G 879 SCVI
