Miele G 879 SCVI Operating And Installation Instructions Download Page 35

Page: 35 / 76

End of programme notification

A buzzer will sound to indicate the end
of the wash programme. This buzzer
can be turned off as follows:

Turning the buzzer off.

Open the door.

Turn off the dishwasher.

Press and hold buttons

and

while simultaneously turning on the
dishwasher. The “ON” indicator lamp
will light and the “

” and

lamps will flash.

If any other indicator lamps flash, turn
off the dishwasher and start again.

The "

" indicator lamp will

flash as long as you are in the pro-
gramming mode.

If the

lamp lights up, the buzzer is

already turned off. If the lamp is not lit,
proceed as follows:

Press the

touch pad. The indicator

lamp will light. The buzzer is now
turned off.

Press the

touch pad. Its indicator

lamp will light up and indicator lamps

through

will go out (if previously

lit).

Press touch pad

again. The

and “

” indicators will flash.

Turn off the dishwasher. The change
is now stored and the buzzer is
turned off for all wash programmes.

Turning on the buzzer.

In order to turn the buzzer back on, fol-
low the same procedure, making sure
the indicator lamp is off before storing
the change using the

button.

Additional features

Summary of Contents for G 879 SCVI













































































Search results

Summary of Contents for G 879 SCVI

Reviews:

Related manuals for G 879 SCVI

Brands by name

Popular brands

Miele G 879 SCVI, Operating And Installation Instructions

Search results

Summary of Contents for G 879 SCVI

Reviews:

Related manuals for G 879 SCVI

Brands by name

Popular brands