MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
81
CHAPTER V - The Matrix / MIDI Router
1. General
The Matrix (or Router) in the MULTIPLAYER functions is completely independently from the
Sequencer section. In addition, all Matrix function settings (such as transpose, filters etc.) can be
made to affect the Song’s tracks as they are recorded or played back. When a recording is being
made via the MIDI inputs the sequencer receives the data after it has gone through the Matrix – i.e.
after the “Realtime Processor“ (please read also the section 6 on page 88).
1.1 Selecting a Matrix program
Each Bank contains 128 Programs, but here you cannot change the numbering mode as
with the Song memory places (see page 39).
➊
Click on
, to switch to Matrix Mode.
➋
Select a Program using
!
or the numeric keys
to
and press
. The arrow
in front of the “
M
“ turns to black.
Matrix Programs can also be selected using MIDI Program Change commands (please read
also Section 6.10 (RMT), page 102).
&
You have selected a Program within a Bank. If this Program memory is empty you can
create a new Program simply by selecting any of its functions (e.g. “Routing“). As soon as
you exit from this again “
no name
“ will have appeared next to the memory number,
showing this Program exists.
MATRIX
Select function:
TMR RTG FLT SPL TRP VEL CTR PRG VOL
#
#
#
#
MATRIX
Select function:
!
!
!
!
SND RMT CAP WAV NAM COP DEL DMP
#
#
#
#
MATRIX
Select function:
!
!
!
!
CNF
