MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
18
8. PANIC - Transparent MIDI Reset (TMR)
Any connection between two MIDI instruments which is accidentally or prematurely broken
could result in “hanging” notes, where notes which are already sounding are never told to stop, or in
controllers which were in use at the time not being zeroed or switched off. Worse than that, if any of
your expanders do not recognize the “All Notes Off” command, you could be in serious trouble in a
live situation.
All MIDITEMP devices have a “Transparent MIDI Reset” function, which can correct these
problems without interrupting the flow of incoming MIDI data, with the result that these catastophes
usually pass unnoticed.
Simply press the
on the highest level (also works on many other levels). The display
shows ** Transparent MIDI Reset ** and the “Panic” function commences immediately. While the
function is at work (approx. 6 seconds) you may continue to play your master keyboard, or run the
Sequencer. Pressing any other key will abort the “Panic” function, otherwise the device will return to
the Mode you were in at the time you pressed the “Panic” button.
In the Configuration Menu „Miscellaneous“ you can exclude this function on the top level to
prevent an inadverntently release during a live situation on stage.
The following data is sent via all MIDI ports and channels when the Panic function is activated:
The following data is sent via all MIDI ports and channels when the Panic function is activated:
The following data is sent via all MIDI ports and channels when the Panic function is activated:
The following data is sent via all MIDI ports and channels when the Panic function is activated:
☞
Pitch Wheel
Value 64 (neutral point)
☞
Controller No. 1 (Modul.)
Value 0
☞
Controller No. 2 (Breath Ctrl.)
Value 0
☞
Controller No. 33 (Mod. [fine])
Value 0
☞
Controller No. 64 (Hold/Sust.)
Value 0
☞
Controller No. 65 (Portamento)
Value 0
☞
Controller No. 66 (Sostenuto)
Value 0
☞
Controller No. 67 (Soft Pedal)
Value 0
☞
Note Off
1-128 on all 16 MIDI channels
&
The huge amount of data necessary for this function can sometimes mean that you will experience
slight timing delays during complex passages. This is because the expanders, and indeed the MIDI
ports themselves, are being stretched to the limit. It is usually only the expanders which are in “Omni
Mode” which have the most trouble. This is because they have to laboriously process every
command on every channel.
