MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
29
4. Device ID (ID)
In this window you can allocate your device a name and an identification letter. However,
this is necessary only if you intend to network several devices using the (optional) “FORNET“ optical
network. The name is entered in exactly the same way for MIDI port (see above).
$
Double-click on
or
.
$
Select
»ID«.
➊
The unit suggests a name.
puts you to the next position.
Confirming
(without giving an ID-number) turns back to the main screen.
%
Leave the function with
.
5. Send “all notes off“ after program change (ANO)
The default setting is “YES“. This means when a program change is requested, all notes are
switched off, so that if a routing is changed you will not be left with droning or “hanging“ notes. You
can set an
»
ANO
«
for each Matrix group seperately.
$
Double-click on
or
.
$
Select
»ANO«.
➊
With the soft-keys
to
you can set for each Matrix group if the function is
activated (LED flashes) or not (LED turns off).
%
Leave the function with
.
6. Setting footswitch functions (FS)
Connect your footswitch (or double footswitch with a stereo jack) with the plug on the front
of your device.
$
Double-click on
or
.
$
Select
»FS«.
➊
Select a footswitch with
or
or
!
and
.
&
The units are normally equiped with a mono jack socket. However it is possible to have your
device fitted with a stereo jack socket. In this case the tip is FS1 and the ring is FS2.
Device Name = MP88-CDW ID:
spc 1 A a ins del
All Notes Off after PC
M1 M2 M3 M4 M5 M6 M7 M8
Foot Switch Settings
TMR FS1 FS2 +/-
