MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
59
3.1.2 Record Song (REC)
3.1.2 Record Song (REC)
3.1.2 Record Song (REC)
3.1.2 Record Song (REC)
➀
Connect the MIDI output(s) of your sequencer to the MULTIPLAYER’s MIDI inputs.
&
If your sequencer uses more than one parallel MIDI outputs, you can connect them to the
MULTIPLAYER’s MIDI inputs. The MULTIPLAYER will then record as much tracks at once as
connections are used.
For playback with the MULTIPLAYER these tracks must then be assigned to the outputs on
the Output Assignment page, otherwise all tracks will be sent via all MIDI outputs
simultaniously.
➁
Activate a free Song memory place (see page47).
$
Press
and call up
»REC«.
➊
Use the number keys to select the MIDI inputs which you have connected, or want to
record from. The LED’s on these keys will light up.
%
Leave with
.
$
Press
and call up
»SYN«.
➋
Using the number keys for the MIDI inputs, select the type of synchronisation required
(“internal“ or “MIDI Clock“)
&
We recommend external synchronisation via MIDI Clock when transferring complete Songs.
To use this method the sending sequencer must be capable of sending a START command,
and MIDI Clock signals when it runs. If this is not the case, you can use internal
synchronisation, and designate a MIDI output to send MIDI Clock with which to synchronize
the sequencer. For this to work you would have to connect the designated MIDI output to
the MIDI input of the sequencer, and make sure that the sequencer’s MIDI Thru function is
switched off! In the majority of cases, however, this will not be necessary.
$
Press
and
.
➌
Press
and select via
!
the required tempo. At this tempo the Song will be played
back later.
&
You can change the tempo later using the “Tempo“ function (see page 72). If you record
via external synchronisation, the Tempo will be calculated automatically of the received
MIDI Clock impulses.
➍
Quit Performance mode by pressing
, and start the sequencer (external sync), or
press
to start the MULTIPLAYER (internal sync). Recording starts, the Song status
display shows “
REC
“, and you can let the Song play through to the end.
➎
In internal sync you can stop recording by pressing
. In external sync it will stop
automatically when the sequencer sends a MIDI Stop command.
IMPORTANT:
IMPORTANT:
IMPORTANT:
IMPORTANT:
You must confirm acceptance of the newly recorded tracks by calling up the “REC“ function again!
You must confirm acceptance of the newly recorded tracks by calling up the “REC“ function again!
You must confirm acceptance of the newly recorded tracks by calling up the “REC“ function again!
You must confirm acceptance of the newly recorded tracks by calling up the “REC“ function again!
