MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
13
In the Standard Bank/Program
Standard Bank/Program
Standard Bank/Program
Standard Bank/Program mode the numbering is organized in a maximum of 56
Banks, each with up to 128 entries (= Midifiles). Via Midi you can reach them with Bank select
starting at no. 65, value is the desired song. All other numbering modes are based on this system,
but display your playlist in a linear counting system.
In the 3-digit
3-digit
3-digit
3-digit mode you can choose your songs without using the bank button directly from
001 up to 999 songs in one display. You can select the song places via Midi still the same way as in
the Standard Bank/program mode (but only with eight different bank selects, of course).
In the 4-digit
4-digit
4-digit
4-digit mode you can choose your songs without using the bank button directly from
001 up to 8.192 songs (7.168 if the wave player is activated) in one display. The possibility of
selecting song places via Midi are still the same as written above.
The system for the two linear counting modes is:
Bank S1A 1 to S1A 128 = S 001 to S 128
Bank S1B 1 to S1B 128 = S 129 to S 256
Bank S1C 1 to S1C 128 = S 257 to S 384
etc.
&
An assign-file written with an operating system higher than version 4.09 can only be
read with an older version if the Standard Bank/program mode had been used!
5. Selecting functions
Almost all functions of the unit are recalled with a special kind of menu
menu
menu
menu. For instance, if
you are in Sequencer mode and press
,
the upper line of the display will show “
Select
Function
”. In the lower line three letters will appear above each number key. These are
abbreviations for the names of each function. The number keys act as soft keys
soft keys
soft keys
soft keys (keys with variable
functions). Pressing a number key (
to
)
will immediately call up the relevant function. If
arrows appear above the keys
and
,
there are more functions in the specified direction. In
case you forget what one of the abbreviations means, simply turn the data wheel
!
. The LED of
the number key for each function will flash, and the function’s full title will appear in the upper line
of the display. The required function can then be called up either by pressing
or by pressing
the relevant number key.
After entering a function, the number keys may still serve as soft keys, whereas the data
wheel in this stage is more likely to be used to set parameter values instead of selecting functions.
