MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
33
9.1.2 Release a drive (REL)
9.1.2 Release a drive (REL)
9.1.2 Release a drive (REL)
9.1.2 Release a drive (REL)
$
Select
»REL«
. If you don’t have changed anything the default settings are actual
and the display shows this:
➊
Select the drive letter to be released with the number keys
to
or via
!
and
. As soon you have confirmed the MULTIPLAYER will return to the top level.
9.2 Using multiple partitions on a drive
Using this function the contents of an existing drive will be ignored and the complete medium new
partitionized and formated. This procedure assigns the complete storage place on the medium to this partition.
Especially users of IOMEGA ZIP drives ® will be happy to have this function because of the problems partitions
of pre-formated mediums can make.
$
Double-click on
or
.
$
Select
»DRV«
$
Select
»INI«
The complete storage space of devices higher than 2 Gigabyte will be assigned to this partition. Drives
with a size bigger than 2GB will cause the message, bigger partitions are not compatible to DOS or WINDOWS
3.x. If you want to use these operation systems together with your MULTIPLAYER you get here the possibility to
limit the partition size to a maximum of 2GB. Using WINDOWs 95 (or higher) or WINDWOS NT, or if you only
use the drive with your MULTIPLAYER, each partition can be sized to a maximum of 4GB.
Drives bigger than 4GB are automatically partitionized by the MULTIPLAYER to 4GB. Since OS 4.20
the player supports up to four partitions on one drive. To create them just call up in the
»
INS
«
menu as often as
you can do the same drive adress (e.G. “X“). The MULTIPLAYER automatically sets the partitions in the right
order to the drive letter. After you have partitionized you have to format each partition! The function “Initialize
Partrition Table“ can only be used if no partition except partition one is installed!
All other steps are similar to the function “Format Medium“!
9.3 Using a Smart Media Card
With the MULTIPLAYER you can use Smart Media Cards (3.3V, sizes up to 64MB) as storage
devices. The Smart Media Card connector wears the ID “Z“, default installed on drive letter “F:“. You
can work with the Smart Media Cards the same way as with harddisc drives, CD-ROMs etc.
Normally the pre-format of a Smart Media Card (like those designed for digital cameras
etc.) is no problem for the MULTIPLAYER. If you format one with the function of the MULTIPLAYER this
format is not compatible to the origin device (if that unit cannot format the card, there’s no way to
bring the “old“ format back).
Release Drive - select drive letter
A: B:X C:3 D:4 E: F:Z G: H:
Device Drive Manager
TMR INS REL FMT INI HID PAR
