Microwave Radio Communications SCM4000 Technical Reference Manual Download

Page: 132 / 274

Routine Operation

3-110

SCM4000

Operator’s Guide/Tech Ref Manual

14.

Press the Up or Down arrow key, as required, to move
the cursor to the

Data ChX

option required.

See

Figure 3-306

Figure 3-306: Data Channel Menu - Typical

15.

Press the Down arrow key to move the cursor to the

Rate:

option and observe the cursor changes to a

cursor.

Note

Pressing the

SEL

key when the

cursor is

displayed will lock the display to allow you to
monitor bit rate changes as they occur. To unlock
the display, press the

ESC

key.

16.

Observe the current bit rate is displayed.

17.

Press the

ESC

key repeatedly until the Main Screen is

displayed.

3.7.18

Monitor/Change Line Equalizer

The procedure required to monitor or change the Line Equalizer
state to

Off

contained in the following steps.

Verify the SCM4000 is powered up.

Verify the Main Screen is displayed.

See Figure 3-

307

. If the Main Screen is not displayed, press the

ESC

key repeatedly until the Main Screen is

displayed.

Demodulator

* Data ChX

T1/E1 X

Rate: 1.54Mb/s

Figure 3-307: Main Screen Menu - Typical

Press the Down arrow key, as required, to move the

cursor to the

System Menu

option.

Press the

SEL

key or Right arrow key and observe the

System Menu

is displayed.

See Figure 3-308

Figure 3-308: System Menu - Typical

Press the Up or Down arrow keys, as required, to
move the

cursor to the

Preset Menu

option.

Press the

SEL

or Right arrow key to select the

Preset

Menu

option.

Note

“

” indicated in the

Preset Menu

in the following

steps represents Presets

thru

. “

Preset #X

”

represents the Preset name.

Observe the

Preset Menu

is displayed.

See Figure 3-

309 on page 3-111

SCM4000

>> Demodulator

System Menu

>> Preset Menu

Active Errors

Error Log

Summary of Contents for SCM4000



















































































































































































































































































Search results

Summary of Contents for SCM4000

Reviews:

Related manuals for SCM4000

Brands by name

Popular brands

Microwave Radio Communications SCM4000, Technical Reference Manual

Search results

Summary of Contents for SCM4000

Reviews:

Related manuals for SCM4000

Brands by name

Popular brands