Microwave Radio Communications SCM4000, Technical Reference Manual

Page: 207 / 274

5
Installation 5-1 SCM4000 Technical Reference Manual
Installation
5.1 Chapter Overview
This chapter describes how to unpack and install your SCM4000
Single Carrier Modem. The topics covered in this chapter are as
follows:
5.2 Unpacking
Each unit is shipped assembled, wired, and factory tested. Each
unit is packaged in appropriate shipping containers.
Here are some tips to help you with unpacking your new
equipment:
• Unpack the equipment carefully to avoid accidental
damage.
• Be sure to locate all parts and accessories.
Topic Page
Unpacking 5-1
Initial Inspection 5-1
Damage in Shipment 5-1
Installing the SCM4000 5-2
Power Connections 5-4
Grounding 5-5
Audio Connections 5-6
Signal Connections 5-8
Cable Assemblies 5-22
Powering Up 5-26
Product Modifications 5-26
• Verify that the items shipped agree with those listed on
the packing list.
• DO NOT discard the container or packing material until
you have inspected the equipment and are sure there is
no shipping damage. The container and packing must be
available in the event that a damage claim needs to be
filed with the shipping carrier.
5.3 Initial Inspection
After the equipment is unpacked, we recommend you inspect it
using the following checklist:
• Check for any dents or scratches. If the equipment is
dented or scratched, it may have suffered internal
damage as well.
• Check that the equipment is clean and dry.
• Check that no cables or connectors are broken, damaged,
or loose.
• Check that no switches or LED indicators are broken,
damaged, or loose.
5.4 Damage in Shipment
Should any damage be discovered after unpacking the unit, use
the following procedure:
• Immediately file a claim with the shipping carrier.
• Forward a copy of the damage report to MRC Customer
Service.
• Contact MRC Customer Service to determine the
disposition of the equipment.