Microwave Radio Communications SCM4000, Technical Reference Manual

Page: 61 / 274

Routine Operation 3-39 SCM4000 Operator’s Guide/Tech Ref Manual
12. Press the Up or Down arrow keys, as required, to
move the
>> cursor to the Modulator option.
13. Press the SEL key or Right arrow key and observe the
Modulator menu is displayed. See Figure 3-78 .
Figure 3-78: Modulator Menu - Typical
Note In the following steps, “ Data ChX ” represents Data
Ch1 thru Data Ch4 and “ Eth Y ” represents Eth 1
or Eth 2 .
14. Press the Up or Down arrow key, as required, to move
the cursor to the
Data ChX: option required. See
Figure 3-79 .
Figure 3-79: Data Channel Menu - Typical
15. Press the Down arrow key to move the cursor to the
Eth Y option required. Observe the cursor changes to
a >> cursor.
16. Press the SEL key or Right arrow key to select the Eth
Y option and observe the cursor changes to a >
cursor.
Modulator
> SR: 20.0MS/s
Mod Type: 16QAM
Data Ch1:
Modulator
* Data ChX
Eth Y
Rate: 9.00Mb/s
17. Press the Up or Down arrow keys, as required, to
move the
> cursor to the Eth EN: option. See
Figure 3-80 .
Figure 3-80: Ethernet Enable Menu - Typical
18. Press the SEL key or Right arrow key to select the Eth
EN: option and observe the > cursor changes to a !
cursor.
19. Press the Up or Down arrow keys, as required, to
select
On or Off .
20. Press the SEL key and observe the ! cursor changes
to a > cursor.
21. Press the ESC key repeatedly until the Main Screen is
displayed.
Note Changes to Presets are not automatically saved.
Changes to Preset settings will be lost if the Preset
is recalled before Preset setting changes have
been saved.
To save Preset setting changes, go to step 19. To
recall Ethernet enable Preset settings established
prior to performing this procedure without saving
the latest changes, go to step 20.
22. To save Preset setting changes, perform “Save Preset
Settings” on page 3-154 . Procedure is complete.
Eth 1
> Eth EN: On
Rate: 12.5Mb/s
LIU Rate: 10Mb