Microwave Radio Communications SCM4000, Technical Reference Manual, Page: 180 / 274

Routine Operation 3-158 SCM4000 Operator’s Guide/Tech Ref Manual
Note If you select the Yes option in the following step, all
errors and/or events in the Event Log will be
cleared, regardless of which error or event is
selected. You cannot clear one or more specific
errors and/or events from the
Event Log .
If you select the No option in the following step, no
events or errors will be cleared from the Event
Log .
10. Use the Right or Left arrow key to select the Yes or No
option and press the SEL key.
11. Observe the following Event Log menu is displayed.
See Figure 3-457 .
Figure 3-457: Event Log
12. Press the ESC key repeatedly until the Main Screen is
displayed.
3.11.6 Monitor System Information
The procedure required to monitor the firmware versions of the
options contained in your SCM4000 configuration is contained in
the following steps.
1. Verify the SCM4000 is powered up.
2. Verify the Main Screen is displayed. See Figure 3-
458 . If the Main Screen is not displayed, press the
ESC key repeatedly until the Main Screen is
Event Log
No Entries
displayed.
Figure 3-458: Main Screen Menu - Typical
3. Press the Down arrow key, as required, to move the
>> cursor to the System Menu option.
4. Press the SEL key or Right arrow key and observe the
System Menu is displayed. See Figure 3-459 .
Figure 3-459: System Menu - Typical
5. Press the Up or Down arrow keys, as required, to
move the
>> cursor to the System Info option.
6. Press the SEL key or Right arrow key to select the
System Info option and observe the System Info
menu is displayed. See Figure 3-460 on page 3-159 .
SCM4000
>> Modulator
System Menu
System Menu
>> Preset Menu
Active Errors
Error Log