Microwave Radio Communications SCM4000, Technical Reference Manual

Page: 46 / 274

Routine Operation 3-24 SCM4000 Operator’s Guide/Tech Ref Manual
Figure 3-31: Preset Menu - Typical
8. Press the Up or Down arrow keys, as required, to
move the cursor to the
Recall Preset option. Observe
the cursor changes to a > cursor.
9. Press the SEL or Right arrow key and observe the
Recall Preset option changes to #X: Preset #X , as
shown in Figure 3-32 , and the > cursor changes to a
! cursor.
Figure 3-32: Recall Preset Option
10. Press the Up, Down, Left, or Right arrow keys to select
Preset
1 thru 9 , as required, and press the SEL key.
11. Press the ESC key repeatedly until the Main Screen is
displayed.
12. Press the Up or Down arrow keys, as required, to
move the
>> cursor to the Modulator option.
13. Press the SEL key or Right arrow key and observe the
Modulator menu is displayed. See Figure 3-33 .
Preset Menu
* #X: Preset #X
Save Settings
Recall Preset
Preset Menu
! #X: Preset #X
Save Settings
Figure 3-33: Modulator Menu - Typical
14. Press the Up or Down arrow keys, as required, to
move the
> cursor to the Mod Type: option.
15. Press the SEL key or Right arrow key to select the
Mod Type: option and observe the > cursor changes
to a ! cursor.
16. Press the Up, Down, Left, or Right arrow keys, as
required, to change the
Mod Type: setting to QPSK ,
16QAM , 32QAM , or 64QAM .
17. Press the SEL key and observe the ! cursor changes
to a > cursor.
18. Press the ESC key repeatedly until the Main Screen is
displayed.
Note
Changes to Presets are not automatically saved.
Changes to Preset settings will be lost if the Preset
is recalled before Preset setting changes have
been saved.
To save Preset setting changes, go to step 19. To
recall modulation type Preset settings established
prior to performing this procedure without saving
the latest changes, go to step 20.
19. To save Preset setting changes, perform “Save Preset
Settings” on page 3-154 . Procedure is complete.
Modulator
> SR: 20.0MS/s
Mod Type: 16QAM
Data Ch1: