Microtronix Access User Guide
The following table provides the description of each column.
Terminal Server Status
Device
Devices that are currently being used terminal server operation. Note that the
direction of modem signals is reversed between DCE and DTE devices.
ttyS0 – WAN port 0 (DCE)
ttyS1 – Console/WAN port 1 (DCE)
ttyUSB0 – USB serial adapter port 1 (DTE)
ttyUSB1 – USB serial adapter port 2 (DTE)
--etc--
DSR
Status of the Data Set Ready modem signal. ON indicates readiness of the DCE
device to accept connections.
CD
Status of the (Data) Carrier Detect modem control signal. ON indicates data
connection status.
CTS
Status of the Clear To Send modem signal. Reflects the DCE flow control condition if
hardware flow control option has been selected.
DTR
Status of the Data Terminal Ready modem signal. ON indicates the DTE device is
ready for a connection
RTS
Status of the Request To Send modem signal. Reflects the DTE flow control
condition if hardware flow control option has been selected.
Local IP
IP address of the local TCP socket. No socket if reported as 0.0.0.0
Local TCP
TCP port number of the local TCP socket. If the local IP address is 0.0.0.0, indicates
the terminal server is listening on that port
Remote IP
If not 0.0.0.0, indicates the IP address of a remote client/server.
Remote TCP
If not 0, indicates the TCP port number of a remote client/server.
55
