manualshive.com logo in svg

MICROTRONIX access 1000 series, User Manual, Page: 48 / 93

Share
Download
MICROTRONIX access 1000 series User Manual Download Page 48

Microtronix Access User Guide

6.2.4  Remove an Existing Route

1.In the 

X.25 to TCP Routes

 table a route may be flagged for removal by selecting the checkbox 

provided in the Remove column of the table in the corresponding route row.  Multiple routes may be 
selected.

2.The route will not be removed until the 

Save and Apply Changes

 button has been clicked.

6.2.5  X.25 to TCP Route Parameters

6.2.5.1  Identify inbound X.25 connection

Device: 

Port to which the peer X.25 client is connected (hdlc0, hdlc1, ANY, XOT).  

If the peer X.25 device is attached to a remote XOT router, then select “XOT”, and specify the listening 
TCP port number in XOT TCP Port field below.  The remote peer for a route can be restricted to a 
single device by specifying the IP address of the remote XOT peer device.

XOT IP Address: 

IP Address of the remote XOT peer.  This may be used to qualify the remote XOT 

peer.  Relevant only when Device (above) is set to “XOT”.

XOT TCP Port:

 The listening TCP port to which a remote XOT peer will connect.  The normal default is 

port 1998.  Relevant only when Device (above) is set to “XOT”.

Connection Type: 

Type of connection being received: SVC (call request) or PVC (automatic)

Called Address: 

X.121 address expected in the called address field (destination) of a received call 

request.

Calling Address: 

X.121 address expected in the calling address field (source) of a received call 

request.  If the calling address in the call request is absent, it is considered a match regardless, and will
the Calling Address parameter will be inserted into the call request if the destination Conversion Type is
XOT.

Call User Data: 

User data field to match

Protocol Handler:

 Specifies the handling of protocols above the X.25 packet layer 3.  Currently, X.29 is

the only option available.  X.29 does partial handling of X.29 messages contained in Q-bit packets, and 
is only effective when Conversion Type RAW, RAW-MBIT, MBIT, RFC1006, RBP, LINE, or IAC-ESC is 
selected.

Local LCN: 

For PVC connection type, specifies the Logical Channel Number to connect.

XOT remote LCN: 

For XOT conversion type, and PVC connection type: specifies the Logical Channel 

Number at the X.25 interface of the remote XOT peer.

48

Summary of Contents for access 1000 series






























































































Reviews:

No comments