Troubleshooting 119
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 166E
Edition 1.1
Error code
E002B
E002C
E0032
E0038
E0039
E003A
E003B
E003C
E003D
E003E
E003F
E0040
E0041
E0042
E0043
E0044
E0045
E0046
E0047
E0048
E0049
E004A
E004B
E004C
E004D
E0050
E0051
E0052
E0053
E0054
E0055
E0056
E0057
E0058
E0059
E005A
E005B
E005C
Description
Toner density is not normal (too high)
Toner density is not normal (too low)
LED head is too hot
RAM is not normal
Exeption interruption is not normal
Bus error
Address error
Undefined order
0 Division interruption
CHK order interruption
TRAPV order interruption
TRAP interruption is not used
Auto vector interruption is not used
Null task
Monitor overrun
Privileged command
Spurious command
Interruption during interruption vector initializing
Macro error
Communication error with the controller (overrun error)
Communication error with the controller (parity error)
Communication error with the controller (framing error)
Communication error with the controller (command error)
Video data input error
No power supply for the controller
Communication error at the power stacker (overrun error)
Communication error at the power stacker (parity error)
Communication error at the power stacker (framing error)
Communication error at the power stacker
Error at the locking device of the power stacker
Fanfold paper is not folded
Stacker is full
Stacker is not ready
No auto mode
Stacker capacity is exceeded
Motor rotation is not normal
Power stacker is active
Error at the stacker
