Paper Handling 23
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 166E
Edition 1.1
!
Tractor
cover plates
#
$
Fig. 3.1.d Opening the tractor cover plates
5. Place the paper on the tractor pins of the left tractor.
The paper perforation should be aligned over 4 or 5 tractor pins.
Now close the green tractor cover plate of this tractor.
6. Spread out the tractor so that the sprocket holes on the right side of
the continuous paper can be placed easily onto the tractor pins.
%
Fig. 3.1.e Inserting paper and adjusting the right tractor to the paper width.
Please make sure that the paper does not reach into the printer too far.
Only the paper sensor has to be covered by the paper.
