66 Panel Functions
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 166E
Edition 1.1
5.12. Selecting the Number of Printpages per Page Format (Two-Up Mode)
Activating this function determines the arrangement of several
printpages per page format (paper width resp. page length).
Panel display
[SOLID 166E ]
[Menu Level 1
]
(
(
(
[Paper Menu ]
[Page Length ]
(
(
(
[Two-Up Mode ]
[Y-Direction ]
(
(
(
[X-Direction ]
[X-Direction: OFF ]
(
(
(
[X-Direction: 2 ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press the NEXT or PREVIOUS key until
[Paper Menu ] is displayed.
Press the ENTER key to select the
paper menu.
Press the NEXT or PREVIOUS key until
[Two-Up Mode ] is displayed.
Press the ENTER key to select the
function Two-up mode.
Operate the NEXT or PREVIOUS key to
effect the adjustment of the two-up
mode to the X-direction (cross to the
print direction).
Press the ENTER key to set the two-up
mode.
By operating the NEXT or PREVIOUS
key the
number of print pages cross to
the print direction can be altered. The
maximum number of print pages being
adjustable next to each other is 9.
Here the number of print pages per
format width was altered to 2.
In addition this new value can be
saved as setup value (using the ENTER
key), before the printer is turned ON
LINE again.
