Panel Functions 81
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 166E
Edition 1.1
5.23. Configuration of Text Margins
This function sets text margins. Margins are expressed in dots at the
concerning edge of the paper.
Panel display
[SOLID 166E ]
[Menu Level 1
]
(
(
(
[Page Menu
]
[Font
Number]
(
(
(
[Margin
]
[Left
]
(
(
(
[from Right
]
[Digit4 0089]
(
(
(
[Digit1 0087]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press the NEXT or PREVIOUS key until
[Page Menu ] is displayed.
Press the NEXT or PREVIOUS key until
[Margin ] is displayed.
Press the NEXT or PREVIOUS key until the
desired margin is displayed.
Pressing the PLUS or MINUS key changes the
value of the current digit (Digit 4 = left
position, in this example: 0). Pressing the
NEXT key moves you to the next digit (the
PREVIOUS key moves you back, if need be).
You can use the number block to set the
function value, too.
The right margin is changed into 87 dot.
In addition this new value can be saved as
setup value (using the ENTER key), before the
printer is turned ON LINE again.
