Micromeritics DVVA II 4000, Operator'S Manual

Page: 167 / 254

DVVA II 4000 Sample Defaults
400-42803-01 (Rev B) - July 2017 8-7
Sequence
Specify a default sequence for the sample file name. The
number you specify is sequenced incrementally each time you
create a sample file and is the one that appears in the
File name
field when you select
File > Open > Sample Information
.
• Use numbers, letters, or other printable characters, such as
dashes. At least three numbers must be included.
• Use up to eight characters
• The application prohibits using such characters as * or ?
Sample
Enter an additional identification that provides more
information than the sample file name alone.
In the field on the left
: edit the prompt for
Sample
if desired.
For example, you may prefer to use
Test
or
Material
. You can
use up to 20 characters.
In the field on the right
: specify a format for the sample identi-
fication. Or, leave this field blank and enter identifications as
files are created.
• Use numbers, letters, or other printable characters, such as
dashes
• Use up to 42 characters (including the $ symbol if used)
• Include the automatically generated file name as part of the
identification by using the $ symbol where you want the
sequence number to appear.
For example, if the sequence number is 000-001, enter the
sample identification as follows:
Lab #25 - $
The resulting sample identification for the first sample infor-
mation file would be:
Lab #25 - 000-001
and the second:
Lab #25 - 000-002
, and so on.