Micromeritics DVVA II 4000, Operator'S Manual

Page: 35 / 254

DVVA II 4000 Specifying Sample File Defaults
400-42803-01 (Rev B) - July 2017 3-3
7. Enter values in the
Skeletal Density
and
Bulk Density
fields that are typical of your sample.
These values, like all other values, can be edited in the sample file.
8. Select the appropriate material from the
Material Properties
drop-down list. The Material
type is used to determine which carbon property models are used for this particular carbon.
For example, a different equation is used to predict COAN for Tread/Hard carbons than for
Carcass/Soft carbons. If you select
Other
, the COAN is not calculated.
9. If you plan to report statistical process control (SPC) information, enter appropriate
information in the
User Parameter
fields. These user-definable parameters enable you to
track statistical process control data; refer to
Sample Defaults
, page
8-6
for additional
information.
10. Click the
Analysis Conditions
tab. Choose the analysis conditions appropriate for your most
commonly analyzed material.
11. Click the
Report Options
tab. Choose the desired reports, using
Edit
to specify details; then
click
Save
.
12. Click
Close
to close the dialog.