metrotek Bercut-ET, Operation Manual

Page: 81 / 116

5.17 Test traffic 81
NUT
jitter measuring
test data generating
port A(B)
port B(A)
Figure 5.94. Jitter measurements. Scheme 3
Figure 5.95. Test traffic menu
•
Send — enable/disable test traffic generating.
• Tx port — select the port to generate test traffic at.
• Frame — frame size (any value in the range between 64 and 9600 bytes).
• Duration — duration of the test traffic generating.
• Rate (L2) — framed rate value specified in percent ( ), in kbps
( ) or in Mbps ( ).
•
Header — switch to the Header menu.
•
ET — time elapsed since the traffic generating has started.
•
RT — time remained to the traffic generating finish.
5.17.1 Test traffic. MPLS settings
Label stack and reception rules can be specified in the Label stack menu:
Tests
⇒
Test traffic
⇒
Header
⇒
Advanced
⇒
MPLS .
Bercut-ET. Operations manual